Showing 81–100 of 186 results
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). DIP switches to select FDX/HDX/10/100/Auto/Force.
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). -40 to 75°C operating temperature range (-T models). DIP switches to select FDX/HDX/10/100/Auto/Force.
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K jumbo frame. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Supports Energy-Efficient Ethernet (IEEE 802.3az).
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to f
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to fiber with SFP socket Support LFP (Link Fault Pass-through) function Supports full/half duplex operation mode P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Supports store and forward transmission Provided DIP-Switch to set operation mode High reliability and rigid IP-30 housing DIN-Rail and…
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a M12 plug to devices with a D-Sub 9 connector. It allows various devices to connect to the CAN bus without the need for extra hardware, maintaining the use of existing devices and enhancing CAN system efficiency and…
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compli
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compliant D-Sub 9 connector. It is tailored for the Ixxat USB-to-CAN V2 and USB-to-CAN FD adapters and facilitates seamless CAN bus connections. This cable allows various devices to connect to the CAN bus without the need for extra hardware or…
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m lon
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m long, shielded and has twisted wires. The cable can also be used for CAN FD buses.
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN bus systems or to insert a galvanic isolation. The CAN-CR200 creates the necessary flexibility to optimize the structure of CAN…
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and one CAN backbone channel is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a physical…
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two seg
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV DC/3.5 kV AC for 1 second, allowing it to be utilized in medical applications. It can be used to improve the load capacity of the…
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD i
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The Ixxat CAN@net NT 100 with one CAN channel is a multifunctional talent and a highly rel
The Ixxat CAN@net NT 100 with one CAN channel is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN and Ethernet systems, providing easy and flexible access to the CAN system via LAN or the Internet. As a CAN-Ethernet-CAN bridge the CAN@net NT…
The Ixxat CAN@net NT 200 with two CAN channels is a multifunctional talent and a highly re
The Ixxat CAN@net NT 200 with two CAN channels is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN and Ethernet systems, providing easy and flexible access to two independent CAN systems via LAN or over the Internet. As a CAN-Ethernet-CAN bridge the…
The Ixxat CAN@net NT 420 with four CAN channels (thereof two channels switchable to CAN FD
The Ixxat CAN@net NT 420 with four CAN channels (thereof two channels switchable to CAN FD) is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN/CAN FD and Ethernet systems, providing easy and flexible access to up to four independent CAN or two…
The CANbridge NT 200 is a CAN to CAN bridge/gateway can be used to easily connect two CAN
The CANbridge NT 200 is a CAN to CAN bridge/gateway can be used to easily connect two CAN systems. It facilitates message exchange by allowing rules and functions to be implemented to control these messages. The CANbridge NT 200 thus enables easy coupling of CAN networks, conversion of networks with different bit rates or frame…
If you have questions about our products the AI-assistant can help guide you to what you are searching for.
