Viser 61–80 af 176 resultater
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Powe
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide…
24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to
24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to 75°C operating temperature range (T models). Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy. Isolated redundant power inputs with universal 110/220 VAC power supply range. Supports MXstudio for easy, visualized...
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx).
10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power
10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx). More than 20 options available.
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X) ports to save the usage of copper ports High reliability and rigid IP-30 housing DIN-Rail and wall mounting
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). DIP switches to select FDX/HDX/10/100/Auto/Force.
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). -40 to 75°C operating temperature range (-T models). DIP switches to select FDX/HDX/10/100/Auto/Force.
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K jumbo frame. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Supports Energy-Efficient Ethernet (IEEE 802.3az).
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to f
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to fiber with SFP socket Support LFP (Link Fault Pass-through) function Supports full/half duplex operation mode P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Supports store and forward transmission Provided DIP-Switch to set operation mode High reliability and rigid IP-30 housing DIN-Rail and…
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a M12 plug to devices with a D-Sub 9 connector. It allows various devices to connect to the CAN bus without the need for extra hardware, maintaining the use of existing devices and enhancing CAN system efficiency and…
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compli
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compliant D-Sub 9 connector. It is tailored for the Ixxat USB-to-CAN V2 and USB-to-CAN FD adapters and facilitates seamless CAN bus connections. This cable allows various devices to connect to the CAN bus without the need for extra hardware or…
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m lon
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m long, shielded and has twisted wires. The cable can also be used for CAN FD buses.
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN bus systems or to insert a galvanic isolation. The CAN-CR200 creates the necessary flexibility to optimize the structure of CAN…
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and one CAN backbone channel is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a physical…
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two seg
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV DC/3.5 kV AC for 1 second, allowing it to be utilized in medical applications. It can be used to improve the load capacity of the…
If you have questions about our products the AI-assistant can help guide you to what you are searching for.
